Odds are fairly good that if you have a vegetable garden or any fruit trees in your yard that you know how to go about canning these items so that you can have them year-round. Whether you can tomatoes so you will have them during the winter or pickle cucumbers, growing our own food and preserving it at home has been commonplace in American culture for a very long time. Pickles, jams, jellies, marmalades, soups, or chutneys have been being made in homes across the country and the world for quite a while and it is still going on today because some people prefer home-made goods to their commercial counterparts.
There are benefits to both growing and canning your own food at home, even though a process that is similar is used by commercial food canners worldwide. One benefit is that you have the knowledge of just how sterile the equipment being used to preserve your food is. You know how clean the items are that you are using to can your food. When you purchase these items in a store, you do not know whether the equipment used was clean or not. You also have the benefit of knowing what pesticides, if any, were used on the fruits and vegetables that you are preserving. You do not have to be exposed to more pesticides and chemicals than you would use to protect your own garden from insects and different kinds of rodents.
One problem with home-canning, though, is that if it is not done properly, mold can start to grow inside the jars of food that you thought that you were preserving so well. Mold grows in everything that is preserved eventually, anyway, but it can occur much sooner if the food that you can in your kitchen is not properly preserved. Most home-canning guides suggest that you date everything you can and use it within a year to avoid spoilage.
Mold-contaminated jars can be a problem, but you can avoid this problem most of the time by making sure the equipment that you use is sterile. You can sterilize glass jars by filling them and your canning pot with hot water (not boiling) and bringing the pot to a slow boil for around 10 minutes. This should effectively remove all microbes and spores from the water.
Any food you can should be washed and thoroughly inspected. Questionable items should not be canned, but thrown away.
Food should also be packed loosely in the jars so that the food inside can be completely heated throughout. If the temperature does not get high enough, it will not be completely sterilized. Mold spores, bacteria, and yeast can continue to grow even in high temperatures.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Saturday, September 8, 2007
Mold in Our Homes
While there is no real way to completely get rid of the mold that exists in both our outdoor and indoor environments, there are some things that we can do to keep mold from growing on our food and our belongings. This typically happens when items like clothing are improperly stored or when foods are improperly preserved in our refrigerators. Whatever the cause may be, it is very likely that we can prevent these instances of mold from occurring if we just exercise a little diligence in the maintenance of our homes.
Mold likes to grow in the refrigerator, especially in jars of jellies and jams, but as long as we keep our refrigerators clean and free of contaminated items, mold will not grow as quickly. Take an inventory of the items in your refrigerator and make sure nothing is sorely outdated. Outdated items can be used for a short period after they expire, but if they start to show discoloration or mold growth, they should be thrown away immediately. Fruits and vegetables that show signs of mold growth should also be thrown away and anything else they were touching, especially other fruits and vegetables, should be washed.
Mold also likes to grow on clothing that has been packed too tightly into a closet space or other container. Air needs to be able to circulate through the entirety of the closet and some closets have air vents located in them to help with this, but if you pack clothes too tightly, then the vent cannot do its job.
If you have baby bottles in your kitchen, then you might have a problem with getting them completely dry if you do not have a dishwasher. If you have to wash your dishes by hand, then the best thing to do in order to keep mold from beginning to grow inside these and other oddly shaped bottles is to dry them the best that you can and put them in your freezer immediately after. Leave them in there until you need the bottles again.
Wet clothes or towels should never be tossed on the bathroom floor or into a hamper and left there. Any clothes that you throw on top of them will become contaminated with mold after they have been left there after anywhere from 24 to 48 hours. Some molds will grow after 24 hours, but many require up to 48 hours to begin to multiply. Wet clothes should be washed immediately.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
Mold likes to grow in the refrigerator, especially in jars of jellies and jams, but as long as we keep our refrigerators clean and free of contaminated items, mold will not grow as quickly. Take an inventory of the items in your refrigerator and make sure nothing is sorely outdated. Outdated items can be used for a short period after they expire, but if they start to show discoloration or mold growth, they should be thrown away immediately. Fruits and vegetables that show signs of mold growth should also be thrown away and anything else they were touching, especially other fruits and vegetables, should be washed.
Mold also likes to grow on clothing that has been packed too tightly into a closet space or other container. Air needs to be able to circulate through the entirety of the closet and some closets have air vents located in them to help with this, but if you pack clothes too tightly, then the vent cannot do its job.
If you have baby bottles in your kitchen, then you might have a problem with getting them completely dry if you do not have a dishwasher. If you have to wash your dishes by hand, then the best thing to do in order to keep mold from beginning to grow inside these and other oddly shaped bottles is to dry them the best that you can and put them in your freezer immediately after. Leave them in there until you need the bottles again.
Wet clothes or towels should never be tossed on the bathroom floor or into a hamper and left there. Any clothes that you throw on top of them will become contaminated with mold after they have been left there after anywhere from 24 to 48 hours. Some molds will grow after 24 hours, but many require up to 48 hours to begin to multiply. Wet clothes should be washed immediately.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
How to Avoid a Buying a Water Damaged Car
One of the most important events in a young person’s life is the purchase of a vehicle and if you are unfortunate enough, as many of us are, to have to buy a used vehicle, well, you might already be a tad aggravated at the process. Maybe you cannot find the right color or the right make or model vehicle that you really want and even if you do find that, is the vehicle a sound one? Does it run the way it should for its age? These questions and more plague those of us who cannot afford a brand new vehicle, but did you ever think about asking whether a vehicle has been submerged completely in water before?
Flooded vehicles being sold without telling the consumer that they have been flooded is a bit more common than you might think. Unfortunately, most of us who go to purchase a used car do not think to ask about this or even check for signs of water damage before we sign the final sale papers. There are a few things that you can do to check and make sure if a vehicle has been flooded before.
Check the upholstery. If it does not appear to match the rest of the vehicle, such as the dashboard and other interior parts of the car, it may have been taken up and replaced due to water damage. If you think it has been replaced, do not hesitate to ask if it has and why the replacement was necessary. If it was due to the vehicle being submerged in water, then this is a vehicle that you probably do not want. You could have a full inspection done by a mechanic that you trust, however, if this is the exact make and model that you want.
Check the trunk and inside the dashboard for signs of rust. Checking around the taillights in the trunk is especially advised, because this is a typical spot where rust will build up if the car has been submerged.
The engine also needs to be checked. If the car was driven into a lake or a river, then the possibility that silt, sand, or mud has gotten into the engine is pretty large. These items can completely ruin an engine beyond repair, even though they may run for a short period of time.
If mold has started to grow in the interior carpet or upholstery, then the vehicle will have a fairly musty smell to it. If you stick your head inside the car and smell air freshener, however, you might want to be careful from that point forward. Air freshener is sometimes used to cover up undesired smells and give you the impression that the car is in better condition than it really is.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Flooded vehicles being sold without telling the consumer that they have been flooded is a bit more common than you might think. Unfortunately, most of us who go to purchase a used car do not think to ask about this or even check for signs of water damage before we sign the final sale papers. There are a few things that you can do to check and make sure if a vehicle has been flooded before.
Check the upholstery. If it does not appear to match the rest of the vehicle, such as the dashboard and other interior parts of the car, it may have been taken up and replaced due to water damage. If you think it has been replaced, do not hesitate to ask if it has and why the replacement was necessary. If it was due to the vehicle being submerged in water, then this is a vehicle that you probably do not want. You could have a full inspection done by a mechanic that you trust, however, if this is the exact make and model that you want.
Check the trunk and inside the dashboard for signs of rust. Checking around the taillights in the trunk is especially advised, because this is a typical spot where rust will build up if the car has been submerged.
The engine also needs to be checked. If the car was driven into a lake or a river, then the possibility that silt, sand, or mud has gotten into the engine is pretty large. These items can completely ruin an engine beyond repair, even though they may run for a short period of time.
If mold has started to grow in the interior carpet or upholstery, then the vehicle will have a fairly musty smell to it. If you stick your head inside the car and smell air freshener, however, you might want to be careful from that point forward. Air freshener is sometimes used to cover up undesired smells and give you the impression that the car is in better condition than it really is.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Subscribe to:
Posts (Atom)
